Audio-Technica AT2035 Studio Pack
The ultimate project studio kit, ready to record straight out of the box
- AT2035 Cardioid Condenser Microphone
- ATH-M40X Professional Monitor Headphones
- Exclusive, Audient iD4 Black audio interface
- Extensive free software package - after registration at Audient's creative
- Big savings compared to buying all components individually
SPECS
Headphones
Type: Dinámicos cerrados
Driver Diameter: 40mm
Magnet: Neodymium
Voice Coil: CCAW (Copper-clad aluminum wire)
Maximum Input Power: 1,600 mW @ 1KHz
Sensitivity: 98 dB/mW
Impedance: 35 ohms
Folding/collapsible: Yes
Weight: 240g (without cable)
Cable - Detachable: Yes
Connector: Gold-plated stereo 1/8” (3.5 mm) connector with 6.3 mm (1/4”) screw-on adapter
Accessories Included: 6.3 mm (1/4”) screw-on adapter, Pouch
Microphone
Element Fixed-charge back plate, permanently polarized condenser
Polar Pattern: Cardioid
Frequency Response: 20 - 20,000 Hz
Open Circuit Sensitivity: -33 dB (22.4 mV) re 1V at 1 Pa
Impedance: 120 ohms
Maximum Input Sound Level: 148 dB SPL, 1 kHz at 1% T.H.D.; 158 dB SPL, with 10 dB pad (nominal)
Low Frequency Roll Off: 80 Hz, 12 dB/octave
Dynamic Range: 136 dB, 1 kHz at Max SPL
Signal-to-Noise Ratio: 82 dB, 1 kHz at 1 Pa
Phantom Power Requirements: 11-52V DC, 3.8 mA typical
Weight: 403g
Dimensions: 170.0 mm (6.69") long, 52.0 mm (2.05") maximum body diameter
Output Connector: Integral 3-pin XLRM-type
Accessories Included: AT8458 shock mount for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch