Audix D2 Dynamic Microphone. 3 Pack

The D2 dynamic instrument microphone is used for stage, studio, and broadcast applications. It is designed with a hypercardioid pickup pattern for isolation and feedback control and is equipped with a VLM™ diaphragm for natural, accurate sound reproduction.

The D2 is an excellent choice for miking instruments with a percussive nature such as rack toms, congas, saxophones, guitar cabinets, and brass. Transformerless design, low impedance, and balanced output insure that the D2 hypercardioid instrument microphone will perform interference-free.

Designed, machined, assembled, and tested by Audix in the USA.

SPECS

• Transducer Type - Dynamic
• Frequency Response - 68 Hz – 18 kHz
• Polar Pattern - Hypercardioid
• Output Impedance - 280 ohms
• Sensitivity - 1.2 mV / Pa @ 1k
• Capsule Technology - VLM Type B
• Off-Axis Rejection - >30 dB
• Maximum SPL - ≥144 dB
• Power Requirements - None
• Connector - 3-pin XLRm
• Polarity - Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector
• Materials / Finish - Black Hard Coat
• Weight - 128 g / 4.5 oz
• Length - 100 mm / 3.9 in

• 1x D2 Instrument Microphone
• 1x DCLIP(opens a new window) Microphone Clip
• 1x P1 Carrying Pouch