Audix D2 Dynamic Microphone

The D2 dynamic instrument microphone is used for stage, studio, and broadcast applications. It is designed with a hypercardioid pickup pattern for isolation and feedback control and is equipped with a VLM™ diaphragm for natural, accurate sound reproduction.

The D2 is an excellent choice for miking instruments with a percussive nature such as rack toms, congas, saxophones, guitar cabinets, and brass. Transformerless design, low impedance, and balanced output insure that the D2 hypercardioid instrument microphone will perform interference-free.

Designed, machined, assembled, and tested by Audix in the USA.

Transducer Type: Dynamic
Frequency Response: 68 Hz – 18 kHz
Polar Pattern: Hypercardioid
Output Impedance: 280 ohms
Sensitivity: 1.2 mV / Pa @ 1k
Capsule Technology: VLM Type B
Off-Axis Rejection: >30 dB
Maximum SPL: ≥144 dB
Power Requirements: None
Connector: 3-pin XLRm
Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector
Materials / Finish: Black Hard Coat
Weight: 128 g / 4.5 oz
Length: 100 mm / 3.9 in