Eve Audio 2-Way 5-inch + AMT 100-watt Active Monitor for Nearfield

The SC205 is a SilverCone two-way system with a 5" woofer. With an extended bass frequency response and an astounding output level, it will easily fill your room with exceptional sound.

The nearfield monitor also comes with the convenience of threaded screw inserts on the bottom and the back. That way, you can mount your SC205 on a regular microphone or speaker stand, or use the back plate for different wall mounting options.

Features

• Tech Talk
  The SC205 uses our 5" SilverCone woofer for an extended bass response. This very stiff diaphragm is honeycomb structured and glass fibre coated. Like in other models, such as the smaller SC204, the SC205 is driven by a sophisticated low distortion copper cap magnet system that uses a 1" voice coil responsible for delivering a greater linear excursion. All in all, this produces a bigger dynamic range than you would naturally assume from a speaker of these proportions. The result is an unsurpassed audio transparency that, when coupled with our proprietary AMT tweeter and PWM amplifier, will surprise you with a very powerful and precise low end.
• The Air Motion Transformer
  Our AMT (Air Motion Transformer) tweeter is our own proprietary technology that follows the rule of not using "off-the-shelf" components when looking for the best possible results. The preciseness and detail in the high frequency, along with the general tightness of the bass and mid-range frequencies, will make the SC205 equally adequate for use on the road or in studio.

Specifications:

General
Tweeter = AMT RS1
Output power tweeter - 50 W
Woofer - 5"
Output power woofer - 50 W
Protection limiter - Yes
Weight - 5 kg (11 lb)

Settings
Volume - - ∞ to + 6 dB
High-shelf filter (-5 dB to +3 dB) - > 3 kHz
Desk filter cut (-5 dB to 0 dB) - 160 Hz
Desk filter boost (0 dB to +3 dB) - 80 Hz
Low-shelf filter (-5 dB to +3 dB) - < 300 Hz
Adjustable LED brightness - Yes
Level-lock dip switch - Yes
Filter-lock dip switch - Yes

Connectors (10k impedance)
RCA in
XLR in

Power consumption
Standby - < 1 W
Maximum - 70 VA