Eve Audio 2-Way 8-inch + AMT Active Monitor for Nearfield and Midfield
Brand new. Not available for curbside pickup. Online orders only.
The SC208 is the last in our two-way system series featuring the ease of use and detailed timbre reproduction.
With a larger woofer and more powerful amplifiers, the SC208 is used as a main speaker in a lot of professional and home-studios. If you're looking for a capable and detailed set of above-average size monitors give this midfield monitor a try.
With the SC208, you will be able to extend your bass frequency response down to 36 Hz. Our custom-made 8" SilverCone woofer driven by a sophisticated low distortion copper cap magnet system with our 1.5" voice coil will guarantee that you will not run out of bass response when it comes to the critical listening and comparison of your mixes. The result is a very tight and dynamic bass, along with the usual greater linear excursion provided in every other EVE Audio model.
Our PWM amplifier, with protection-limiting, is able to deliver a short-term output power of 150W for a maximum output level of 112 dB (SPL @ 1m). So you can be sure that there will be plenty of power to make critical and precise judgements over your mixes.
The SC208 also uses our proprietary AMT (Air Motion Transformer) RS2. The RS2 stands for Ribbon System 2, meaning it has a bigger front plate and a larger magnet driving the motion with the utmost efficiency.
As with every other EVE Audio speaker, you get both balanced XLR inputs and unbalanced RCA inputs for greater convenience.
Features
- Free-field frequency range (-3dB): 36Hz - 21kHz
- Tweeter: AMT RS2
- Woofer: 200mm/8"
- Max SPL per pair: 120dBspl
- Output power (woofer): 150W
- Output power (tweeter): 50W
DSP and SMART-knob
All EVE Audio monitors feature a high-resolution DSP electronics. A high-quality analog/digital converter from BurrBrown (24bit/192kHz) converts the analog input signal supplied via RCA or XLR. The DSP provides latency-free filtering while protecting tweeter and woofers against overload across the entire frequency range. When switched on, the volume of the monitor increases slowly to leave enough time to reduce the source volume if the input signal is too loud.
Adjustments to the acoustic environment can be made via the front rotary/pressure encoder, the SMART-knob with rotating LED ring. This knob allows the levelling of system volume as well as the adjustment of filters for room variables (low shelf, mid eq and high shelf filters). All settings are displayed on the LED ring, providing instant information about the selected values. The brightness of the LED ring can be adjusted for dark studios or video applications.
High-quality Class D amplifiers complete the system and deliver enough power to the demands of modern music production. Selected volume and/or filter settings can be independently fixed with DIP-switches that are positioned on the rear of the amplifier to prevent unauthorised or unintentional adjustments.
Specifications:
General
Tweeter - AMT RS2
Output power tweeter - 50 W
Woofer - 8"
Output power woofer - 150 W
Protection limiter - Yes
Weight - 10,9 kg (24 lb)
Settings
Volume - - ∞ to + 6 dB
High-shelf filter (-5 dB to +3 dB) - > 3 kHz
Desk filter cut (-5 dB to 0 dB) - 160 Hz
Desk filter boost (0 dB to +3 dB) - 80 Hz
Low-shelf filter (-5 dB to +3 dB) - < 300 Hz
Adjustable LED brightness - Yes
Level-lock dip switch - Yes
Filter-lock dip switch - Yes
Connectors (10k impedance)
RCA in
XLR in
Power consumption
Standby - < 1 W
Maximum - 170 VA