Fender Made in Japan Traditional II 60's Stratocaster Neck, 21 Vintage Frets, 9.5" Radius, U Shape, Rosewood

Fusing Fender's traditional aesthetics with sophisticated Japanese craftsmanship the made in Japan Traditional II series necks offer the sought after and iconic feel of Fender MIJ instruments.

Crafted in the same facility as the Made in Japan series instruments, the Traditional II 60’s Stratocaster Neck features a classic “U” shape and incorporates a flatter 9.5" radius and vintage frets on a rosewood fingerboard. A gloss urethane finish provides classic feel and a slimmer 1-5/8" (41 mm) nut width makes for easy playability.

This replacement neck is for a Fender® or Squier® by Fender guitar.

Because Fender genuine replacement necks have not been mounted to guitar bodies, nut slots must be cut by qualified personnel. Other installation processes may be required, such as fret work, fitting the neck to the neck pocket, and other instrument setup procedures. Your local FMIC Authorized Service Center can install genuine replacement necks; find Authorized Service Center locations near you in the “Support” section of fender.com.

Features

• Stratocaster neck with walnut stripe
• 9.5"-radius and “U” shape neck profile
• Rosewood fingerboard with 21 vintage frets and white dot inlays
• Gloss urethane finish
• Pre-slotted bone nut

Specifications:

General
- Series: Necks
- Orientation: Right-Hand
- Color: Natural
- Instrument Type: Stratocaster®
- Country Of Origin: JP

Neck
- Material: Maple with Walnut Stripe
- Finish: Gloss Urethane
- Shape: "U" Shape
- Thickness: 1st Fret - .846” (21.5 mm), 12th Fret - .905” (23.0 mm)
- Mounting: 4-Bolt
- Fingerboard Radius: 9.5" (241 mm)
- Fingerboard Material: Rosewood
- Position Inlays: White Dot
- Side Dots: White
- Number of Frets: 21
- Truss Rod: Vintage-Style Heel Adjust
- Truss Rod Nut: Vintage-Style Slotted
- String Nut: Bone
- Nut Width: 1.615" (41.02 mm)
- Nut Material: Bone

Hardware
- Tuner Mounting Config: Vintage-Style 2-Screw

Measurements
- Dimensions: 3.20x7.20x29.90 IN
- Shipping Weight: 2.80 LB
- Headstock Thickness: .540" (13.71 mm)
- Peg Hole Diameter: 9.2 mm
- Fret Size: Vintage
- Scale Length: 25.5" (648 mm)
- Shipping Length: 29.90 IN
- Shipping Height: 3.20 IN
- Shipping Width: 7.20 IN