Lake People LP-G103-P-MKII XLR-Stereo Headpone Amplifier for recording and livesound

The Lake People Phone-Amp G103-P MKII is a stereo headphone amplifier for recording and livesound. Different to most comparable models the overall gain may be altered with the aid of internal jumpers to better match specific headphone characteristics. Due to this technique, this headphone amplifier is able to drive nearly all existing headphones from 8 … 600 ohms load impedance. Because of its noise- and THD-optimized circuitry layout, G103-P MKII covers high quality demands.

In spite of its compact dimensions, G103-P MKII offers optimum flexibility and high power. Reliability even under rough or improper handling conditions has been another important goal of development. Thus, the unit is absolutely long-term short-circuit proof.

In addition, the G103-P MKII is equipped with filters to prevent overload by inaudibly low and high frequencies. The case of G103-P MKII is made of black anodized aluminium, including the front- and back panels. This provides high mechanical stability and resistance against rough handling. The cases surfaces are providing excellent electrical conductivity for optimum EMC characteristics. Mains is connected via a three-pin IEC/CEE socket and a matching three-wire mains cable with Central Europe-type mains connector. The mains cable may vary to fit the demands of different markets The unit is factory-set to a mains voltage of 230 V AC. Mains voltage may vary between 190 and 250 without any effect on flawless operation. The built-in mains transformers provide the internal supply voltages of approx. +/- 25 V.

Features

• Professional stereo headphone amplifier for studio and live sound applications
• Internal jumper-controlled gain allows precise matching to any headphone impedance (8–600 ohms)
• Noise- and THD-optimized circuitry layout ensures pristine audio fidelity
• Short-circuit proof for enhanced durability and long-term use
• High/low frequency filters prevent overload by inaudible signals
• Heavy-duty anodized aluminum chassis for EMI protection and physical stability
• IEC mains input with internally switchable 230V power supply

Specifications

Performance
- Supported Headphone Impedance: 8 – 600 ohms
- Gain Settings: Internally adjustable via jumpers
- Internal Supply Voltages: ±25 V
- Noise Floor: Ultra-low noise design
- THD: Optimized for high-quality performance

Connectivity
- Inputs: Stereo line input (typically via rear RCA or XLR depending on version)
- Outputs: 2 x 1/4" TRS headphone jacks (front panel)

Power
- Mains Voltage: Factory set to 230V AC (operational range: 190–250V)
- Power Input: IEC/CEE 3-pin socket
- Transformer: Internal

Construction
- Housing: Black anodized aluminum (chassis, front, and back panel)
- EMC Performance: High due to conductive surface and shielding
- Dimensions (W x H x D): Approx. 168 x 48 x 145 mm
- Weight: Approx. 1.0 kg (2.2 lbs)