Lake People LP-G103-S-MKII Cinch Stereo Headpone Amplifier for recording and livesound
Brand New. Not available for curbside pickup. Online orders only.
The Lake People Phone-Amp G103-S MKII is a stereo headphone amplifier for recording and livesound. Different to most comparable models the overall gain may be altered with the aid of internal jumpers to better match specific headphone characteristics. Due to this technique, this headphone amplifier is able to drive nearly all existing headphones from 8 … 600 ohms load impedance. Because of its noise- and THD-optimized circuitry layout, G103-S MKII covers high quality demands.
In spite of its compact dimensions, G103-S MKII offers optimum flexibility and high power. Reliability even under rough or improper handling conditions has been another important goal of development. Thus, the unit is absolutely long-term short-circuit proof.
In addition, the G103-S MKII is equipped with filters to prevent overload by inaudibly low and high frequencies. The case of G103-S MKII is made of black anodized aluminium, including the front- and back panels. This provides high mechanical stability and resistance against rough handling. The cases surfaces are providing excellent electrical conductivity for optimum EMC characteristics. Mains is connected via a three-pin IEC/CEE socket and a matching three-wire mains cable with Central Europe-type mains connector. The mains cable may vary to fit the demands of different markets The unit is factory-set to a mains voltage of 230 V AC. Mains voltage may vary between 190 and 250 without any effect on flawless operation. The built-in mains transformers provide the internal supply voltages of approx. +/- 25 V.
Features
- Stereo headphone amplifier built for studio and live sound use
- Internally adjustable gain via jumpers to match a wide range of headphone impedances (8–600 ohms)
- Ultra-low noise and THD-optimized circuitry for high-fidelity performance
- High mechanical durability with anodized aluminum chassis and panels
- Short-circuit proof design ensures long-term reliability
- High/low frequency filters prevent distortion from inaudible signals
- Excellent EMI shielding thanks to conductive surface finish
- Factory-set 230V power input with wide operating range (190–250V)
Specifications
Performance
- Supported Headphone Impedance: 8 – 600 ohms
- Gain Settings: Internally switchable via jumpers
- Internal Supply Voltage: ±25 V
- Noise: Optimized ultra-low noise floor
- THD: Less than 0.001%
Connectivity
- Inputs: Stereo line input (typically RCA or XLR, depending on model variant)
- Outputs: 2 x 1/4" TRS headphone outputs (front panel)
Power
- Mains Voltage: 230V AC (factory set, functional range: 190–250V)
- Power Connection: IEC/CEE 3-pin socket
- Transformer: Internal
Construction
- Enclosure: Black anodized aluminum chassis, front and rear panels
- EMC Performance: Excellent due to conductive surface finish
- Dimensions (W x H x D): Approx. 168 x 48 x 145 mm
- Weight: Approx. 1.0 kg (2.2 lbs)