Mackie PPM1008 8-Channel Powered Mixer 1600W w/ FX

Ultra-lightweight, immensely powerful and equipped with the tools to get the perfect sound anywhere without breaking your back. The PPM1008 features dual Mackie-designed Class-D Fast Recovery™ amplifiers which provide the kind of power required for modern speakers, 32-bit RMFX+ “Gig Ready” FX and premium Mackie mic preamps for the ultimate powered mixer.

BIG SOUND, SMALL FOOTPRINT

The PPM1008 Powered Mixer is an excellent choice for small to medium sized venues or bars that have limited space. It’s compact and ultra-lightweight design mean you can pull it out when you need it and have all the power you need. It's an excellent solution for integration into existing passive loudspeaker systems, bands touring small clubs or any application requiring an ultra-lightweight, powerful, all-in-one mixing and amplification solution.

Features

• Fully featured 8-channel, 1600W, ultra-light Professional Powered Mixer with onboard 32-bit digital RMFX+™ processor
• 800W + 800W Mackie designed class-D, Fast Recovery™ power amplifiers
• 32-bit RMFX+™ processor featuring 24 sane, useable reverbs, choruses, and tap delay for live applications
• 8 premium Mackie mic preamps with 48V phantom power and TRS inserts (ch 1-6)
• New single in-line compression provides increased presence and punch for vocals and instruments
• 2 stereo inputs with dual RCA and dual ¼-inch line inputs for flexible connectivity
• Mackie’s 3-Band Active channel EQ with a mid sweep (100Hz-8kHz) on mono channels
• 2 built-in DI boxes for direct instrument connections
• Separate Monitor and FX auxiliary sends
• 12 segment LEDs for the Main and Monitor outputs
• Dual 9-Band graphic EQ on the Mains and Monitor outputs for tuning rooms and monitor mixes
• 3-mode amplifier for ultra-flexible routing, switchable as Mains stereo L/R, mono Mains/Monitor 1, or Mon 1 & Mon 2
• Precision Passive EQ for enhanced clarity and LF response with Mackie passive loudspeakers
• Rugged metal handles built into the sides of the mixer case for easy transport from gig to gig.
• Classic Mackie rounded front chassis design. If the PPM rolls on its face during transport the controls are recessed and protected
• Ultra-Lightweight and portable (25.2 lbs / 11.4 kg)

Specifications:

- Power Rating: 800+800W Peak

Mic/Line Inputs 3-pin XLR Microphone x8
- 3-pin XLR Microphone x8
- 1/4″ Phone Mono Line x4
- L/R Stereo 1/4″ Phone Line x2
- L/R Stereo RCA Phono Line x2
- 1/4″ Phone Mono Line/Instrument x2

- Mains Inputs: Unbalanced 1/4″ Phone A/B x2
- In-Line Inputs/Returns: No

Aux Sends
- MON1 Send – 1/4″ Phone
- FX/MON2 Send – 1/4″ Phone

- Aux Returns: No

Inserts
- 1/4″ TRS Phone
- All Mono and Instrument / Line Inputs

- BUS (Group) Outputs: MAIN Left/Right – L/R Stereo 1/4″ Phone
- Main Output: Speaker Outputs – A/B Speakon and 1/4″ Phone Connectors
- Tape I/O: L/R RCA Phono
- Monitor Outputs: MON1 Send – 1/4″ Phone: FX/MON2 Send – 1/4″ Phone

EQ Section Channel EQ
- High Shelving: +/- 15dB @ 12kHz
- Mid Peak Sweep (Mono chs): +/- 15dB
- Mid Sweep Range: 100Hz to 8kHz
- Hi Mid Peaking (Stereo chs): +/- 15dB @ 2.5kHz
- Lo Mid Peaking (Stereo chs): +/- 15dB @ 400kHz
- Low Shelving: +/- 15dB @ 80Hz
- 9-Band Graphic EQ
- Main and Monitor 1: +/- 15dB @ 63, 125, 250, 500, 1k, 2k, 4k, 8k and 16kHz

- Solo/Mute: No
- Channel Level Control: Rotating Pot Controls
- Trim/Gain Control: Rotating Pot Controls
- Phantom Power: +48V
- Metering: Stereo Peak LEDs

Frequency Response
- Mic Mono Inputs: < 10Hz to 80kHz
- Line Mono Inputs: < 10Hz to 40kHz
- Line Stereo Inputs: < 10Hz to 75kHz

- Signal-to-Noise Ratio: -128dBu

Total Harmonic Distortion (THD)
- Mic Mono: < 0.007% High Gain
- Mic Mono: < 0.005% Low Gain
- Line Mono: < 0.005% Low Gain
- Line Stereo: < 0.01% at Main Out

- Power Supply: 120VAC 50/60Hz, 680W
- Dimensions (HxWxD): 12.3 x 19.3 x 11.4″ (314 x 490 x 290mm)
- Weight: 24.5 lb (11.1kg)