Peavey PVXp 10 Bluetooth Powered Speaker 520 Watts 1x10

The Peavey PVXp 10 Bluetooth features a reliable bi-amped power section that provides a total of 520 Watts of peak dynamic power with DSP based compression and limiting. This enclosure features a 10" heavy-duty woofer with a 2-3/8-inch voice coil and 50 ounce magnet, and the RX10 compression driver with a 1-inch titanium diaphragm on a 100 degree horizontal x 60 degree vertical pattern asymmetrical horn.

The PVXp 10 Bluetooth provides two channels with a balanced input via a combination jack that accepts balanced TRS 1/4- inch input as well as a balanced XLR input. A switch is provided to change between line level gain and mic level gain. A third channel is for a Bluetooth source, or alternatively a 1/8" AUX input jack. Each channel has an adjustable Level control and a three-band EQ section. There is a balanced output, a Male XLR, that can feed the mixed signals from the three channels out to another component. A front baffle LED indicator that can be set to light when power is on, and when the "soft-limiting" DDT circuit is activated, or it can be turned off altogether. The LCD display and EQ presets, along with other DSP operating parameters are accessed via a one-knob selector.

Features:

• Two-way bi-amped sound reinforcement enclosure
• RX10 compression driver, with 1 inch titanium diaphragm
• Reliable fan-cooled power amps with DSP protection
• Total of 520W peak dynamic power
• DSP control for precise crossover, EQ and limiting functions
• Bluetooth input is via a dedicated input channel
• Mix/Thru Output is via a male XLR jack
• Durable plastic injection-molded trapezoidal enclosure
• Extra angled section on right side allows floor monitor use
• Pole mount molded-in for 1 3/8" diameter poles
• Top and bottom flying point inserts
• 10 heavy-duty woofer with 2 3/8" voice coil & 50 oz. magnet
• Full-coverage heavy-duty perforated steel grilles, with powder coat finish
• DSP I/O is at 48 kHz and 24 bits, internal processing is 56 bit double-precision
• Peavey's Quadratic Throat Waveguide technology, 100 by 60 degree coverage
• Asymmetrical horn aims the sound down 10 degrees, at the audience, not over their heads
• Analog input is via a combo female XLR and 1/4" TRS phone jack with balanced input
• Three channels in total, two for analog, and one for Bluetooth or AUX input via a 1/8" jack
• Each channel has a level control and a 3-band EQ section to adjust and shape the input signals

Specifications
- Configuration: Active 2-Way
- Enclosure Type: Bass-Reflex Loudspeaker
- Total Power Capacity: 520 W Peak
- HF Driver: 1 x 1" / 25.4 mm Asymmetrical Horn Titanium Compression Driver
- LF Driver: 1 x 10" / 254 mm Woofer
- Frequency Range: 52 Hz to 20 kHz -10 dB (Half-Space)
- Wireless Connectivity: Bluetooth

- Enclosure Type: Bass-Reflex Loudspeaker
- Total Power Capacity: 520 W Peak
- Amplifier Power Rating: LF: 400 W Peak, HF: 120 W Peak

Drivers
- HF Driver: 1 x 1" / 25.4 mm Asymmetrical Horn Titanium Compression Driver
- MF Driver: None
- LF Driver: 1 x 10" / 254 mm Woofer
- LF Voice Coil: 2.38" / 60.45 mm
- Magnet: 50 oz / 1.4 kg

Performance
- Frequency Range: 52 Hz to 20 kHz -10 dB (Half-Space)
- Frequency Response: 65 Hz to 20 kHz ±3 dB
- Maximum SPL: 123 dB (Peak)
- Coverage Angle: 100° H x 60° V (Asymmetrical Horn Down)
- Speaker Sensitivity: 96 dB

I/O Impedance:
- Combo XLR-1/4" Line Input:
-- 20 Kilohms (Balanced)
-- 15 Kilohms (Unbalanced)
- Combo XLR-1/4" Mic Input: 2.7 Kilohms (Balanced)
- 1/8" / 3.5 mm Aux Input: 6.4 Kilohms

- THD: ≤0.5%
- Protections: Infrasonic

Connectivity
- Audio I/O:
-- 1 x Combo XLR-1/4" 3-Pin Female Balanced/Unbalanced Mic/Line Input
-- 1 x 1/8" / 3.5 mm TRS Female Unbalanced Aux Input
-- 1 x XLR 3-Pin Male Balanced Line Thru/Output
- Network I/O: None
- USB: None
- Wireless Connectivity: Bluetooth

Signal Processing
- Crossover: 2000 Hz
- EQ: Yes
- Parametric EQ: None
- Semi-Parametric EQ: None
- Filters: High-Pass , 48 dB/Octave
- Dynamic Processing: Compression, Limiter
- Alignment Delay: 1.2 ms
- Phase Adjustment: None
- Digital Signal Processing: 24-Bit DSP
- Maximum Sampling Rate: 48 kHz / 24-Bit

Power
- AC Input Power: 100 to 120 VAC, 50 / 60 Hz
- AC Power I/O: 1 x IEC Input
- Power Consumption: 100 W

Physical
- Mounting:
-- 4 x M8 Fly Point (Bottom, Top)
-- 8 x M8 Fly Point (Bottom, Side, Top)
-- 1 x Pole Socket (Bottom)
- Handles:
-- 1 x Top
-- 1 x Each Side
- Cooling: Fan
- Construction Material: Metal Grille, Plastic
- Dimensions: 20 x 12.6 x 11" / 50.8 x 32 x 27.9 cm
- Weight: 27 lb / 12.2 kg

Packaging Info
- Package Weight: 31.485 lb
- Box Dimensions (LxWxH): 22.2 x 17.9 x 15.6"