Peavey PVXp 15 Bluetooth Powered Speaker 980 Watts 1x15

The PVXp 15 Bluetooth features a reliable bi-amped power section that provides a total of 980 Watts of peak dynamic power with DSP-based compression and limiting. This enclosure features a 15" heavy-duty woofer with a 2 3/8 inch voice coil and 50 ounce magnet, and the RX14 compression driver with a 1.4 inch titanium diaphragm on a 100 degree horizontal x 50 degree vertical pattern asymmetrical horn. The PVXp 15 Bluetooth provides two channels with a balanced input via a combination jack that accepts balanced TRS 1/4 inch input as well as a balanced XLR input. A switch is provided to change between line level gain and mic level gain. A third channel is for a Bluetooth source, or alternatively a 1/8" AUX input jack. Each channel has an adjustable Level control and a three-band EQ section. There is a balanced output, a Male XLR, that can feed the mixed signals from the three channels out to another component. A front baffle LED indicator can be set to light when power is on, and when the "soft-limiting" DDT circuit is activated, or it can be turned off altogether. The LCD display and EQ presets, along with other DSP operating parameters, are accessed via a one-knob selector.

Features

• Advanced DSP with Modes and Locations
• 3-Band EQ + High-Pass Filter
• Quadratic Throat Waveguide: 100x50°
• 3-Channel Mixer with Level Control
• Dual Combination XLR-1/4" Inputs + 3.5mm
• 59 Hz to 20 kHz Frequency Response
• 127 dB Max SPL Output
• Asymmetrical Horn: 10° Down
• Integrated Handles for Easy Transport
• 16 Fly Points for Easy Installation

Specifications
- Configuration: Active 2-Way
- Enclosure Type: Bass-Reflex Loudspeaker
- Total Power Capacity: 980 W Peak
- HF Driver: 1 x 1.4" / 35.6 mm Asymmetrical Horn Compression Driver
- LF Driver: 1 x 15" / 381 mm Woofer
- Frequency Range: 52 Hz to 20 kHz -10 dB (Half-Space)
- Wireless Connectivity: Bluetooth

- Enclosure Type: Bass-Reflex Loudspeaker
- Total Power Capacity: 980 W Peak
- Amplifier Power Rating: LF: 1 x 840 W Peak, HF: 1 x 140 W Peak

Drivers
- HF Driver: 1 x 1.4" / 35.6 mm Asymmetrical Horn Compression Driver
- MF Driver: None
- LF Driver: 1 x 15" / 381 mm Woofer
- LF Voice Coil: 2.38" / 60.45 mm
- Magnet: 50 oz / 1.4 kg

Performance
Frequency Range: 52 Hz to 20 kHz -10 dB (Half-Space)
Frequency Response: 59 Hz to 20 kHz ±3 dB
Maximum SPL: 127 dB (Peak)
Coverage Angle: 100° H x 50° V (Asymmetrical Horn Down)
Speaker Sensitivity: 97 dB
THD: <0.5%
Protections: Infrasonic, Output Limiter

Connectivity
- Audio I/O:
-- 2 x Combo XLR-1/4" 3-Pin Female Balanced/Unbalanced Mic/Line Input
-- 1 x 1/8" / 3.5 mm TRS Female Unbalanced Line Input
-- 1 x XLR 3-Pin Male Balanced Line Thru/Output
- Network I/O: None
- USB: None
- Wireless Connectivity: Bluetooth
- Wireless Range: 32.8' / 10 m

Signal Processing
- Crossover: 1.8 kHz
- EQ: Yes
- Parametric EQ: None
- Semi-Parametric EQ: None
- Filters: High-Pass , 48 dB/Octave
- Dynamic Processing: Compression, Limiter
- Alignment Delay: 29 ms
- Phase Adjustment: None
- Digital Signal Processing: 24-Bit DSP: User Settings, Venue Settings
- Maximum Sampling Rate: 48 kHz / 24-Bit

Power
AC Input Power: 100 to 120 VAC, 50 / 60 Hz
AC Power I/O: 1 x IEC Input
Power Consumption: 150 W

Physical
- Mounting:
-- 4 x M10 Fly Point (Bottom, Top)
-- 12 x M8 Fly Point (Bottom, Side, Top)
-- 1 x Pole Socket (Bottom)
- Handles:
-- 1 x Top
-- 1 x Each Side
- Cooling: Fan
- Construction Material: Metal Grille, Plastic
- Dimensions: 28.3 x 18.9 x 18.7" / 71.9 x 48 x 47.5 cm
- Weight: 50 lb / 22.7 kg

Packaging Info
- Package Weight: 61 lb
- Box Dimensions (LxWxH): 31 x 22 x 20.5"