Shure PGXD14/BETA98H Instrument Wireless System

The PGXD14/BETA98H digital wireless system from Shure adds the clarity of 24-bit digital audio to the legacy of trusted Shure microphone options for wireless performance. This system includes the BETA 98H/C, a precision-engineered miniature cardioid condenser microphone with integrated clip and gooseneck for horn applications, as well as a PGXD1 bodypack transmitter and a PGXD4 receiver.

The BETA 98H/C is a premium cardioid condenser instrument microphone that clamps onto the bell of wind instruments or onto the rim of percussion instruments. The integrated gooseneck and ratcheting swivel joint allows the mic to be easily positioned and secured, and an isolation shockmount reduces the transmission of instrument "key noise" and other mechanical noise. A gooseneck angle brace is included to provide better retention of the microphone placement during more active performances.

The rugged PGXD1 bodypack transmitter easily clips onto a belt or guitar strap, and provides you with a 20Hz–20kHz frequency range, up to 10 hours of continuous use on 2 standard AA batteries (not included), and 200' of wireless freedom.

The PGXD4 receiver offers 24-bit/48kHz accurate sound, offers technology for incredibly accurate sound, auto frequency selection and greater reliability thanks to its true digital diversity.

Shure PGXD1 Digital Wireless Bodypack Transmitter Features:

• PGXD1 bodypack transmitter with a Beta 98H/C instrument mic
• 24-bit/48kHz digital technology for incredibly accurate sound
• Automatic frequency selection locates a clear channel instantly
• One-touch sync automatically syncs the transmitter and receiver
• True digital diversity for rock-solid wireless signal reliability
• Up to 5 compatible channels per frequency band
• Gain adjustment range: 10dB
• Power: 2 AA batteries
• Battery life: Up to 9 hours

Shure PGXD4 Digital Wireless Receiver Features:

• 24-bit/48kHz digital technology for incredibly accurate sound
• Automatic frequency selection locates a clear channel instantly
• One-touch sync automatically syncs the transmitter and receiver
• True digital diversity for rock-solid wireless signal reliability
• Up to 5 compatible channels per frequency band
• 1/4" and XLR audio outputs

Specifications:

Shure PGXD4 Receiver:
- Housing: ABS
- Audio Output Level (ref. +/- 38 kHz deviation, 1 kHz tone):
- - XLR connector (into 3000 Ohms load): -2.5 dBV
- - 1/4 inch connector (into 10000 Ohms load): +10 dBV
- Impedance: XLR: 50 Ohms, 1/4 inch: 50 Ohms
- Sensitivity: -102 dBm at 10-5 BER
- Image Rejection: > 70 dB, typical
- Audio Outputs: Balanced XLR; TRS 1/4 inch
- Audio LED: Red: 2 dB below clip, Amber: 12 dB below clip, Green: 50 dB below clip
- Power Requirements: 12-18 Vdc at 150 mA, supplied by external power supply
- Dimensions (HxWxD): 1.6 x 7.125 x 4.1 inches (40 x 181 x 104 mm)
- Weight: 289 g (10.2 oz.)

Shure PGXD1 Bodypack Transmitter Specifications
- Audio Input Level: +10 dBV maximum, at minimum gain setting, -16 dBV maximum, at maximum gain setting
- Gain Adjustment Range: 26 dB
- Input Impedance: 1 M ohms
- RF Output Level: 10 mW maximum (dependent on applicable country regulations)
- Dimensions (HxWxD): 4.25 x 2.50 x 0.75 inches (108 x 64 x 19 mm)
- Weight: 128 grams (4.5 oz.) without batteries
- Housing: Molded polycarbonate case
- Power Requirements: 2 AA size batteries
- Battery Life: Up to 10 hours

Dimensions and Weight in Packaging
(900 MHz)
- Shipping Weight: 4 lbs
- Shipping Dimensions: 18 x 13 x 4 in
- Manufacturer Part Number (MPN): PGXD14/BETA98H-X8

Warehouse Resealed, (900 MHz)
- Shipping Weight: 4 lbs
- Shipping Dimensions: 18 x 13 x 4 in
- Manufacturer Part Number (MPN): PGXD14/BETA98H-X8